How to Default AutoCAD Settings?

Restoring AutoCAD Settings to Default

If you’re encountering issues with your AutoCAD setup or want to refresh its configurations, reverting to the default settings can often resolve the problem. The process varies slightly depending on the version you’re using. Below is a comprehensive guide on how to reset AutoCAD settings to their default state for various versions, including AutoCAD 2025.

Resetting AutoCAD 2025 to Default Settings

1. Access the AutoCAD application and navigate to the top-left corner of the window.
2. Click on the AutoCAD menu and select the option labeled “Reset AutoCAD”.
3. When prompted, confirm your decision to restore all settings to their default configurations.

Restoring AutoCAD 2016 Settings

1. Begin by clicking on the Windows start icon.
2. Move through the menu to find the folder named Autodesk, then select AutoCAD 2016.
3. Within this folder, look for the option “Reset Settings to Default” and click on it.
4. You will have the choice to back up your current settings or proceed without saving. Make your choice accordingly.

Restoring AutoCAD 2021 Settings

1. Open AutoCAD 2021 or AutoCAD LT 2021 and access the application menu.
2. Select “Reset AutoCAD” or “Reset AutoCAD LT” from the menu options.
3. Confirm the action by agreeing to restore all settings to their original defaults.

Resetting AutoCAD 2012 to Default Settings

1. Locate the Windows Start menu and navigate to the “All Programs” section.
2. Find Autodesk and then select the AutoCAD 2012 option.
3. Within this submenu, choose “Reset Settings to Default”. This method is applicable for most versions of AutoCAD starting from 2012 and onward.

Resetting the Ribbon in AutoCAD 2025

1. Right-click within the ribbon area of the AutoCAD interface.
2. Select “Restore Default Ribbon” from the context menu that appears.

Adjusting Cursor Settings in AutoCAD

1. Right-click in an empty area of the drawing workspace and choose “Options” or click the application icon and select “Options”.
2. Go to the “Selection” tab and adjust the “Pickbox Size” by moving the associated slider to increase or decrease the size.
3. Switch to the “Display” tab and modify the “Crosshair Size” as desired, using the slider or by inputting a specific number.

Restaurant Reset of the UCS in AutoCAD

1. Click on the “View” tab and find the “Coordinates” panel, then click on “Named UCS”.
2. In the UCS dialog box that appears, navigate to the “Named UCSs” tab.
3. Select the UCS definition you wish to delete and hit the “Delete” button. Remember, you cannot delete the current UCS or one named “UNNAMED”.

Accessing Preferences in AutoCAD

1. Open the application button and select “Options” from the dropdown menu.
2. In the dialog box that appears, explore the various tabs to configure your settings as per your requirements.
3. If you want to save the settings while keeping the dialog open, simply click “Apply”.

Frequently Asked Questions

What happens to my custom settings if I reset AutoCAD?

Resetting AutoCAD to its default settings will erase any custom configurations you have set up, including toolbars, palettes, and application settings. It’s advisable to back up your current settings before proceeding with the reset.

Can I restore my settings after resetting AutoCAD?

Once you reset AutoCAD, the custom configurations cannot be restored directly unless you previously backed them up. Make sure to export your settings before performing a reset if you wish to preserve them.

Is resetting AutoCAD safe?

Yes, resetting AutoCAD is a safe procedure typically used to fix persistent issues or errors. However, ensure that you are prepared for the loss of any custom configurations you may have made.