To remove points within SolidWorks, whether they are part of a spline or sketch, follow these detailed steps based on the type of element you wish to delete.
Removing Points from a Spline
Select the Spline: Navigate to your spline in the graphics area. A spline is a curve defined by control points, known as spline points. Moving your cursor over the spline will highlight the points you can modify.
Right-Click on the Point: Locate the specific point or endpoint you want to remove. Right-click on the point to bring up the context menu.
- Delete the Point: From the menu, select the option labeled "Delete Point." Once you select this, the spline will automatically update to reflect the changes, reconfiguring the remaining points into a new continuous curve.
Hiding Sketch Points in SolidWorks Drawing
If you are looking to simply hide sketch points instead of deleting them, follow these steps:
Open the Drawing: Make sure you are in the drawing view where the sketch is situated.
Locate the Sketch: Find the sketch within the graphics area or use the FeatureManager design tree on the left side of the window.
Right-Click on the Sketch: Once you have located the sketch, right-click on it to open the context menu.
- Select Hide: Choose the "Hide" option to conceal the sketch points from your current view. This does not delete them but merely hides them from view.
Removing Construction Lines
For deleting construction lines specifically, follow these steps:
Activate the Geometry Tool: Go to the top toolbar and click on "Geometry."
- Delete All or Selected Lines:
- To remove all construction lines, select "Delete All."
- If you only want to delete individual lines, click on the specific lines to select them, then right-click and choose "Delete" from the shortcut menu, or simply press the DELETE key on your keyboard.
Hiding All Sketches at Once
If you want to hide all sketches in the current document, here’s what to do:
Access the View Menu: Click on the "View" tab located in the menu bar at the top of the window.
Choose Hide/Show: From the drop-down, hover over "Hide/Show" and then select "Hide All Types."
- Confirm Hiding: After you select this, all sketch items will be hidden from the current document. Remember, to show them again, you will need to uncheck the "Hide All Types" option.
FAQ
1. Can I undo the deletion of a point in SolidWorks?
Yes, if you mistakenly delete a point, you can undo the action by pressing Ctrl + Z or by clicking the Undo icon in the toolbar.
2. Will deleting a point affect the entire spline?
Yes, deleting a point will cause the spline to automatically adjust its shape based on the remaining points. It may change the curvature and overall design of your spline.
3. Is there a way to lock points in a spline while working on another point?
Yes, you can use the "Fix" constraint on points in SolidWorks. Right-click on the point you want to lock and select "Fix" from the context menu, which will prevent it from moving while you modify other points in the spline.
