Understanding View Rotation in MicroStation V8i
Rotating the view in MicroStation V8i is essential for achieving precise architectural and engineering designs. This guide provides a detailed step-by-step process to rotate views effectively within the software.
Step 1: Access the Rotate View Tool
To begin, ensure that you have your project open in MicroStation V8i. Locate the “View Control” tool, often found in the interface toolbar. Click on this tool to access the rotation options available for your active view.
Step 2: Choose the Rotation Method
MicroStation offers various methods for rotating views, including:
- Free Rotation: Allows a smooth rotation without constraints.
- Predefined Angles: For precise increments such as 90 degrees. If you choose this method, you can later input specific angles for rotation instead of freely rotating.
Select the method that best suits your current project requirements.
Step 3: Use Key-Ins for Precise Rotation
For more precision, utilize key-ins to specify your rotation accurately. If you want to rotate the view by 90 degrees:
- Open the command window within MicroStation.
- Type the following command for clockwise rotation:
RV=-54.5,-54.5,-90
This command indicates the angles for rotation where you define the viewpoint. - To rotate counter-clockwise, enter:
RV=-54.5,54.5,90.
After entering the appropriate key-in command, click on the desired view you wish to rotate.
Step 4: Confirm the Rotation
After executing the rotation command, take a moment to assess the new orientation of your view. If it requires any adjustments, repeat the rotation steps as necessary until you achieve the desired angle.
Step 5: Saving the Rotated View
Once the view is satisfactorily rotated, it’s essential to save this new perspective for future use:
- Navigate to the “View” menu at the top of the screen.
- Select the “Save View” option to store the current rotation.
- Provide a name for easy identification and hit "OK."
This will allow you to return to this specific view without needing to repeat the rotation process.
FAQ
1. Can I rotate views in MicroStation V8i using a mouse?
Yes, you can use the mouse for free rotation by pressing and holding down the middle mouse button, then moving the mouse to adjust the view angle to your preference.
2. What if I need to rotate multiple views at once?
To rotate multiple views simultaneously, you need to select each view by holding down the Ctrl key while selecting views, then apply the rotation command collectively to achieve a uniform angle.
3. Is there an option to revert back to the original view?
Absolutely, MicroStation V8i allows you to revert back to the original view by either using the “Undo” function (Ctrl + Z) right after rotating, or by selecting the saved view if you had saved it prior to modifications.
